Understanding key lighting terminology, technologies and associated components is vital to helping you make the best lighting choice for your business. All to often the pitfalls of LED products don’t reveal themselves until it’s too late and the damage is already done. It takes a particularly poor LED or poorly designed product to shows issues at first glance, so what can you do to minimise this risk?A little knowledge can go a long way in helping you evaluate the choice that are on offer to you to avoid issues arising later on.
The lumens is the SI unit of measurement for luminous flux; this is a measurement of the visible light radiated from a light source such as an LED, or light bulb.
Lux is the SI unit of measurement for illuminance, think of this as the intensity of light at a surface or point in space. There are health and safety guidelines for lux levels that should be provided in offices, warehouses, ambulances etc, in short any place of work such as the back of a vehicle.
There is a relationship between lux and lumens and that is that 1 lumen = 1 lux per square metre. Therefore, if an LED radiated 1 lumen of light and you could distribute that light with an even intensity over a 1m² area then wherever you took a lux reading on that surface you would measure 1 lux.
LED manufacturers will quote the lumen output for their devices, these are known as ‘raw’ lumens and are what most people quote for their lights. Once the LED is encased in an enclosure various parameters will affect the lumens being produced such as temperature, efficiency of secondary optics and reflectors, drive current etc. The only way to really tell which finished product radiates the most lumens is to conduct a lab test where the lights are placed in an integrating sphere where the resultant lumens can be calculated. These resultant lumens are known as ‘effective’ lumens. The quicker, cheaper way to ascertain which finished product provides more light is to use a lux metre and measure the lux readings at set points on the floor or working plane.
Lux readings should be taken at multiple points to build up a general idea of the light dispersion as the two products will probably distribute their lumens differently. If they both had 100 lumen LEDs in them but one light produced a focused ‘spot’ beam then the lux immediately beneath would measure more than the ‘flood’ beam version as the flood version would be spreading its lumens over a larger area.
Lux levels will generally only apply to the very environment where they are measured. This is because once the light waves have left the light they will then be affected by the next points of incidence in the environment; such as the reflective properties of walls and floors, and obstacles in its path etc. For example, if you took the same room with a light bulb hanging from the ceiling and took a lux reading on the floor you would get different readings if the walls were painted matt black compared to gloss white as the black walls would absorb some of the light before it got to the ground where as the white walls would reflect a lot of the light.