Selector guide - Fluorescent - Surface Mounted Lights

Linear Series (DX)

 

 

The Linear is the very latest in T5 fluorescent lights, designed to enhance a variety of interiors. Using a high efficiency inverter, the Linear produces very high levels of light for the power consumed - a great advantage where a mains transformed supply is not available. Read more.

 

Download Linear_Series_DX full spec (PDF)

 

 

---

Trilite Series (KL)

 

 

The Trilite has a unique ability to power up to three tubes at one time. This allows you more flexibility as different light levels can be achieved simply by adding or removing tubes. Because the electronic inverter adjusts to the number of tubes fitted, when a tube begins to fail the light will continue to work until the replacement is found. Read more.

 

Download Trilite_Series_KL full spec (PDF)

 

---

LM Series

 

 

The LM is the latest addition to the Labcraft low profile T5 fluorescent lighting range. Available in single and twin 8w versions, this light will give you a bright source of light whilst consuming very little power (only 0.65A for the LM16). Read more.

 

Download LM Series full spec (PDF)

 

 

---

Pearl (SL)

 

 

The Pearl range has been designed to provide an attractive, yet cost effective, light unit to compliment any modern interior.  It’s subtle styling hides a robust aluminium construction making it suitable for all leisure applications.  The lens is opal in colour which helps to reduce glare and enhances the appearance of the light unit.  Read more.

 

Download Pearl_SL full spec (PDF)

 

---

Opal (FX)

 

 

The Opal has been designed for use in a wide variety of applications. Moulded from polycarbonate, this stylish shape is extremely robust and capable of withstanding substantial heat. Read more.

 

Download Opal_FX full spec (PDF)

 

 

 

---

T5 Batten Lights (BL, BLLED)

 

 

The Labcraft Batten Light boasts extra light output and best ever performance and reliability. The ‘reflector’ chassis is extruded from strong aluminium into a curved profile which captures normally wasted light and boosting output by 38%. Life expectancy has been substantially increased with the introduction of our ‘XT’ circuit which allows over ¼ million on/off cycles without causing tube failure. Read more.

 

Download T5 & LED Batten Light full spec (PDF)

 

---

T5 Cargo Lights (BLC, BLCLED)

 

 

The Labcraft Cargo light has been designed for corner installation where space is normally unused. The reflector chassis is angled at 35 degrees and extruded from strong aluminium. Shaped into a curved profile and finished in high quality paint, it captures normally wasted light and reflects it forward, significantly boosting light output.   Read more.

 

Download T5 Cargo Lights full spec (PDF)

 

---

Coachlight (CL)

 

 

The Coachlight series was originally designed to compliment Public Service Vehicles where appearance is of primary importance in both illuminated and rest mode. Since its development, the light has proved hugely successful due to its subtle looks and high level of reliability. Read more.

 

Download Coachlight_CL full spec (PDF)

 

 

---

Squarelight (NX)

 

 

The Squarelight is a sturdy low profile light unit suitable for all applications, particularly in corners and in restricted areas such as under shelving and inside smaller vehicles. Compact but bright; the 16w 2D format tube produces over 1,000 lumens, giving you a high light output, low current drain unit for use with either a 12V or 24V DC power source. Read more.

 

Download Squarelight_NX full spec (PDF)

 

---

Weatherproof (WP)

 

 

The Weatherproof light has been designed based upon our own range of high quality batten lights to give you a highly energy efficient lighting solution for both external use and high humidity applications. Read more.

 

Download Weatherproof_WP full spec (PDF)

 

 

 

---

Crystalite (XL)

 

 

This light unit is available in both surfaced mounted and recessed versions, both of which are supplied with a white fixing plate/surround which provides external mounting holes. The slim design of this light unit allows for ultimate headroom preservation; the surface mounted unit is only 34mm in height. Read more.

 

Download Crystalite (XL)full spec (PDF)

 

 

---

Nordic Series (DL)

 

 

Constructed on an aluminium base, the laminated PVC shade can simply be clipped into place, making installation and tube replacement quick and easy.  This slim low profile light also incorporates an on/off push switch situated at one end. Read more.

 

Download Nordic Series (DL) full spec (PDF)

 

 

---

T8 Batten lights (BL)

 

 

The Labcraft T8 Batten Light boasts extra light output together with best ever performance reliability. Our ‘reflector’ chassis is extruded from strong aluminium in to a curved profile which captures normally wasted light and boosting the light output. Read more.

 

Download T8 Batten lights (BL) full spec (PDF)

Applications